A Fairy Tale Bedroom Set in Pink Ombré

So I managed to dig deep for some ambition and found a little. I coaxed The Kid into helping and we spent the better part of the morning photographing finished projects. So now I just have to get them written now.

Today’s reveal is actually two pieces. Once again, I have reverted back to my other signature painting style in five or six shades of pink. It seems to be a style that sells easily and quickly and has a timeless sort of appeal. What little girl wouldn’t love to be surrounded in a sea of pink?

It started with the acquisition of an old headboard and foot board. I originally planned to turn it into one of those benches that are so popular, but once I started looking it over, I realized what solid pieces these were and how beautiful they could become. I hunted for sideboards and found a pair, but wasn’t until they were primed did I realize that they had the wrong connecting hardware. Back to the hunt. I actually had to place a “wanted” ad for the pieces specifically asking for the right hardware. Who knew that there were more than one design?

I finally did find the pieces I needed – along with another headboard and foot board. I almost didn’t want to have to deconstruct the side boards, but they were in pretty rough shape. I am planning to use the head and foot boards to make that originally planned bench seat.

In the meantime, the hardware was attached to new 1 x 6’s and a piece added to act as a lip to hold either a box spring or slats for the mattress. Then everything was primed… you can see a couple of other projects in the following photo as well:

photo 2Following the primer, the base sections of the headboard was painted in the standard base color… the pink in its lightest hue. Then it was on to painstakingly hand painting each post a different shade of pink.

IMG_0434The fifth and darkest shade was reserved for the side boards. I had specifically purchased appliqués to use on the both the headboard and foot board, the wide expanse of plain color seemed a bit too plain for me. The appliqués when arrived were a bit smaller than anticipated, apparently I was thinking inches but they were actually centimeters, but I opted to use them anyway. I like the way they turned out to be ‘dainty’ in the end.

The matching dresser was a great accidental find and apparently I was so excited that I forgot to take any pictures of it before working on it. It was found in an abandoned farm house and had a rather extended family of mice living in the drawers. It had some water damage to the drawers as well and it took a lot of sanding, gluing and strengthening to bring this piece back to its original glory. Originally, the dresser had wood wheels, but water, weather and time had degraded them past saving, so they were simply removed. I love the idea of how tall this piece initially stood.

I sanded every surface, including the drawer sides and bottoms and it was almost like building from scratch considering the amount of glue that was used to put it back together. A lot of love and sweat went into restoring this piece. I think that is why I opted to use the pink ombré paint on the dresser. Its such a classic look that I knew it was the right decision.

2015-11-14 13.23.58 2015-11-14 13.25.45And here is photographs of the bed frame:

2015-11-14 13.23.02

The bed and the dresser… note the styles really compliment each other without being an exact match. Both have those charming appliqués which are just the icing on these cakes!2015-11-14 13.23.12

A little tough to see but the same appliqué on the headboard also appears in the same place on the foot board.2015-11-14 13.23.18

The great design of the bed frame is that it is adjustable for both a full and a queen sized mattress without any work, other than moving the side boards to the separate set of slots.2015-11-14 13.23.44A shot of the foot board appliqué. The lighter two colors of pink were used on the posts on the foot board and the two lighter on the headboard posts. The sideboards have the darkest color.

2015-11-14 13.22.49

I sometimes wished that I had a daughter that I could have spoiled with this type of bedroom furnishings. Perhaps she would have been more like me growing up and be a tomboy and hated everything pink (like me!). I love being able to provide this to some other lucky little girl. I can see this being a very nice Christmas present!

Here it is stored and waiting delivery!

photo 14A few additional photos. It was a beautiful day here in the Midwest, with great sunshine. Felt great to get these photos taken!

I used hardware that I had salvaged from a previous piece and painted light pink. The top drawer received two glass knobs that had just the slightest pink hue to them. Perfect jewelry to this wonderful piece.

I did want to point out one unique feature that I was unable to completely erase while restoring this piece. I like to think of it as the signature of the former occupants and sort of a fairy tale component of the magic in these pieces. You see there are little nibble marks across the bottom of the top drawer face…

Mouse Bites Pink Mousejulie

Manners Are Still Being Taught (And I, For One, Am Thankful)

I was touched, today, by the kindness of a mother and her daughter. It would seem in this impersonal age of computers and email and smart phones, something as corny as manners are still being taught. And it warms my insides!

I wasn’t much of a ‘girly’ girl, considering that I really grew up with five brothers (more or less) and so pink and frilly and sparkly was never my thing. As a mother, I had just my son, so I never had the chance to do girly things for a child. Or live vicariously through a daughter.

As many of you know, I have a sister blog. Its all about creative stuff… and to continue to fund projects, I sell what I finish. So, often I will work on pieces that are pink and frilly and sparkly. Last week, I sold a dresser -painted in six shades of pink – to a mom and to my delight, she brought her daughter along with her to pick up the piece.

Lovely conversation followed. (Maybe I am ready to be around more people?) Morgen had an awesome story behind her name and I had remarked what an awesome name it was. I guess her age about 8 or 9, and she wasn’t shy and was quite engaging as well. So, once we had finished the transaction, I asked if she liked American Girl dolls. (And I haven’t found many at that age who aren’t just ga-ga over those dolls. Me, too, I guess, since I had actually built a doll house in proper proportions – that thing was nearly seven feet tall!). But I digress.

I have a sizable amount of inventory to a failed idea about creating affordable clothing, accessories and props for the doll line – called “Dolls and Cupcakes”. I thought it would be a great idea, as the actual American Girl doll line is crazy expensive. A pair of shoes for a doll can range upwards of $20 to $30! I hoped that I could fill that need.

Alas, it was not to be. So with Morgen and her mom standing in my foyer and finding that Morgen was, indeed, a doll enthusiast, I retrieved one of the two remaining beds that I had made and presented it to her. She loved it. I was happy to have a little more gone from the house.

Now, here is the crux of the story. Today, I received a thank you card from Morgen. Hand written on a cute card, she expressed her appreciation of not only the doll bed, but for the dresser as well. I was floored! In a good way! I cannot recall the last time that someone took the time and effort to actually thank me, and especially using the good old USPS and something as archaic as a stamp and a pencil!

What a joy! I loved that her mom went above and beyond to teach her daughter the proper etiquette and for Morgen to sit down and author the note.

Totally made my day. No, totally made my week and month! I am so warmed!

Okay, y’all can make fun of me, but this really meant a lot.

End of rant! :-)


PS If by chance you read my other blog, you may note that I posted the same story in both places. That’s how much I was pleased!!

Sliding into home base… we’re this close!

Okay, I know, I’ve been chanting this for a few weeks now, but short of a couple of minor details and finishing the play microwave, we are so close. Nothing like a long four day holiday to really get things done.

In the meantime, I thought I’d show you the wrap up of a couple of the smaller projects. One is the pair of sofas. I showed you earlier the start of the project. You can see the beginning here.

Once I cut it in half and ended up with two smaller sofas, I have wavered on whether to include one or both. But once I took the pieces upstairs to upholster them, I knew what I wanted to do. I found two pieces of fabric that I picked out earlier for the basis of my master bedroom makeover: pale turquoise and chocolate brown.

By virtue of trial and error, I figured out how to get the fabric in place. I started with the pattern that resembles paisley and it turned out pretty good. I made a couple of mistakes with the other one (the one with stripes) ending up with a seam in the front and the side stripes being a little wavy. I guess that is the difference between no noticeable nap in a fabric to one with obvious nap!

DSCN1878I set them in the dollhouse and realized that they seemed just a little ‘unfinished’. So I decided to add legs to both pieces and a skirt. Now I had enough fabric for the ‘paisley-ish’ fabric, but I really cut it close with the striped fabric, so I decided to do them both the same. Found a nice fringe that matched both fabrics but they had exactly what I needed… it always makes me nervous when I cannot buy a ‘little extra’ for that ‘just in case’.


I also found these little candle holders that when cut down and spray painted black, turned into the perfect legs. A little Elmer’s glue and it was good to go.


DSCN1887Then, using a glue gun, I wrapped the fringe trim around the bottom. Viola!, I have the perfect little sofas.DSCN1919That pretty much wraps up the projects needed to complete the dollhouse. Later this afternoon, once I have all the photos taken, the dollhouse will officially go on sale on eBay, Etsy and my local Craigslist. I am hoping to sell this quickly and then work out the details with delivery.

It has been a fun project, but I am so ready to be done and move this out of my entry way and into the home of some little girl and her dolls.

The Finish Line is Within Sight!

So me and The Kid have been putting some real effort into finishing this dollhouse and we’re getting very close. I am hoping to have the bulk of it done by the end of the weekend. I am so ready for this project to be done and over with… and I can get my entry way back!

So, updates: The floors have been done in the bathroom and the bedroom. Laid 2″ square tiles in the bathroom and then grouted with caulk. Because the house still needs to be delivered and therefore undergo some critical traveling, I didn’t want the grout to break or crack so thought that the caulk would be a much better solution. DSCN1853Here is a quick shot of the tile installed. I used Liquid Nails to adhere it, not standard practice for the installation of tile but a good solid decision based on the size of the room and the number of tiles.

DSCN1855Here is the floor with the caulk ‘grout’. I am really liking the clean look of the tile.

DSCN1857Here it is with the baseboard trimming. Isn’t this sweet? And The Kid did a great job of making a door transition and gluing and then grouting the space between the bathroom and the bedroom.

DSCN1858A little bit of clean up to do and it is ready to be staged. You can see in this photo that the floor has been stained (two coats) and then polyurethaned (two coats) and the trim also installed. It, too, is ready for furniture!

DSCN1836You may recall that I started work on the love seats, I wanted to show you how I applied 1″ foam to the pieces to get ready for upholstery. One piece wraps up from the seat and over, all the way to the bottom. A couple of staples and lots of glue, a few clips to hold it in place while it dries.


Next, I wrapped both arms with the same foam. This time I used clamps in addition to the staples, clips and glue to hold things together until they dried.

DSCN1848 DSCN1849

Both loveseats got similar treatments with the foam on the front (forgot the photos). But they have been relocated to my sewing room for the upholstery work. Probably won’t get to them until we finish the work on the house and its ready to be furnished. Additional photos promised.

DSCN1850This is the side and back view of the third floor. Slowly this piece is coming along. You can see that I am toying with ideas for how to “roof” the angled pieces, and at this point, have not settled on a solution.


I stumbled across the most wonderful little piece of furniture. It actually had three small photo albums in it, but it is going to be transformed into a fireplace. Which means, at some point, I need to scout “fire wood” for it. I also need to figure out how to put floor moulding with the tricky angles, but The Kid thinks he has a way. Ah, I love that Kid!

I won some glassware at a local auction, in additional to a 12 foot x 30″ purple counter top (all for the grand sum of $15!) that I have plans for. But… like I have said many times, no new projects started until this doll house is completed. Now that I have this quick update written, I am going to go work on the kitchen’s lower cabinets and get them ready for installation. Once that happens, then I can do the tile countertops, get the sink installed and complete the trim around the edges. Then its just a matter of details! I can see the finish line!

Once this has been done, it is going up for sale. If you are in the market for a custom doll house, watch this space. I have been thinking about the logistics of getting this shipped or (my choice) delivered, I know that whoever is the recipient of this gift is just going to love it. And just in time for Christmas!

Okay, thanks for stopping by and for following my progress. Remember to keep making beautiful things for the sake of beautiful things! And of course, I’d love to hear any ideas you might have for finishing touches!

Thanks again!


Gaining Ground on the Dollhouse Project

Today is one heckuva warm day – been this warm for several days. Makes me not want to do anything in the garage or outdoors. I send the Kid out with birdseed and water for the birdbath and regularly send him out to water the strawberries and his peppers. Just too dang hot to be out there long.

So, I opted to move the dollhouse inside. As you may recall, I had started work on a second dollhouse after delivering the first one to my grandniece. If you’ve not seen it, you can see it here.

I’ve mentioned the second doll house occasionally, my first thought was to duplicate much of the work and design from the first one, but as I’ve gotten started, it has quickly become a monster! Here is the second one in early steps:

dscn1423The top shelf was to be a kitchen and the bottom was supposed to have a bedroom and a bathroom. My plans for the kitchen soon outgrew the space and it also bothered me that the part that a little girl would play with was so high off the ground.

My son and I put together the basic construction for my second attempt at this house. Looks like this:


Yes, this would give me the added space that I wanted. So, this morning I listed the first piece on Craigslist and moved the box into its space in the entry way.


The cabinets that I had been assembling was pretty haphazard, working with two different pieces that I found at Hobby Lobby, I just sort of ‘put that here, place that there’ approach. I’ve had to do some trimming and adding to get everything to fit together properly and its just sort of taken on a life of its own!

These are the pieces I found and am using from Hobby Lobby:

649442_1I’ve turn the drawer unit on its side and removed some drawer supports to make the lower cabinets (where the sink is going). The window units became the upper cabinets. Its all just random and I need to reign it in before it becomes too much! They will, in the end, become white and have a actual tile counter. The cabinet between the stove and ‘fridge will have a wood top for chopping. And with mention of the stove and ‘fridge, you can see them in the photo, they are the most perfect shade of turquoise!

Here’s a little better shot:

DSCN1784I had hoped for room for a dining room table, maybe booth style, but now am thinking there really isn’t room. Maybe I’ll do a pub table with stools against the wall? Guess I will see what I find that will work. But the cabinets and ‘fridge will be stocked with polymer food and scaled down boxes and bottles. Attention to detail will be evident.

The bottom portion will be a bedroom and bath. I have most of the required furniture and pieces and it is just a matter of painting walls and installing flooring. There is yet to be an upper room/attic, in this style:

ea7ef63cdedd363d4bbf7a32079fc709I cannot locate the original link for this piece, so if you know it, please send it along (I like to give credit where credit is due.) I like the simplicity of the outside and I am actually thinking that my cabinet exterior will simply be stained, since I used a high grade plywood. Will make it more of a piece of furniture.

UPDATE: A big thanks to a fellow blogger (http://kitchencasualties.blogspot.com) I now have the link to the doll house above. You can see it on easy.com here.

In case you were wondering, this piece will be for sale in the near future. I just like the planning and execution of an idea. If you’re interested, let me know. I hate to say it, but the price tag for this piece – which will include all the furniture and accessories – will be high. It isn’t often that you will find something like this for sale.

Okay, enough for now. Need to get the first coat of paint onto the cabinets as I’ve gotten it all primed. One day, I will actually get my kitchen and entry way back!

Thanks for dropping by!


Wardrobe Redesign

Months ago, I ran across a beautiful old wardrobe that had been handed down to someone who apparently didn’t appreciate what they had. It was relegated to a corner of a garage and because of this, the front doors and bottom frame sustained some pretty extensive damage. Sad face.

But, that also meant that I picked it up for a song. The interiors are immaculate and the back and top are in really great shape too. But that left open the question of what to do to “fix” the damage. It sat unattended for some time while I finished other projects and even when I went back to work (funny how a full time job with a lengthy commute can eat into my spare time), I tried to re-sell it to someone else who might want to take it on as a restoration project. No luck.

But this might work out to my advantage. Now on evenings and weekends I am going to set to bringing my own special touch to this piece. I searched high and low for walnut veneer, without much luck, as I didn’t have to want to travel too far or pay too much. So, again it sat in my garage, although in much better surroundings.

And I have stumbled onto the design I want to take it. And there is a nice little tutorial on how to approach it. If you’re interested in how to do it, just visit the website.


I am going to rebuild the base with the help of my son and then I am going to strip the veneer off the doors and sand it down to a nice solid finish. Then it is going to get painted in a beautiful high gloss black and then the doors are going to get a colorful abstract painting in bold beautiful colors. The interiors are simply going to get a cleaning and a sealer to protect the still beautiful finish.

So, here is the before:


And I will provide updates as I progress. There is no hurry to getting this project done and I want to take my time with it. In the meantime, I am also working on the other American Girl dollhouse project. This one will be sold when done, and I expect it to command a pretty penny. And it will be a fun project as I work on it.

Here is the work so far:


Basically it is a big box. :-) It measures 48″ wide by 48″ high and is 24″ deep and the shelf rests at 24″ and is built out of beautiful cabinet grade plywood (I’m thinking hardwood floors throughout). Yes, this is the beginnings of the most amazing dollhouse for 18″ sized dolls, ie. American Girl dolls. Although there are a wide variety of popular dolls that size, including Our Generation, Madame Alexander, Favorite Friends and so many more, that would feel just as home in this doll house. Intentions include a base which should be a small lawn and an attic. The kitchen will be to-die-for… boasting turquoise appliances and a plethora of cabinets and I am hoping for an adjoining dining room. It is also to have a bathroom (you should see the toilet!) and a bedroom. I have so much collected already, I am excited to see this come together.

Thanks for dropping by and taking a peek. And apologies for being so absent lately. Come back soon!


Bits and Pieces, Odds and Ends

Have been taking it a little easier since we’ve completed and delivered the doll house. Working on some smaller items while I relax a little.

A couple of things that I wanted to do but never seemed to have the time to do, was to create a sign for the half bath that is down at the end of the hallway. There are two doors together, one for the laundry room and one for the bath. Inevitably, guests sent down the hall open the wrong door. I saw a sign like this on Pinterest, I think, and knew I wanted to do something similar.DSCN1523This was done with a plant hanger (Home Depot) and a precut and routed plaque (Joann’s) and then just searched online for a font that I liked. I did this all freehand, although I was looking at specific designs for reference. I then used plastic shower curtain rings that I split with a hack saw and just slipped through holes drilled in the face and then around hanger. Hand painted the two rings black. Then two screws and it was done.

I thought that having this particular door completed sort of made the other one seem kind of, I dunno, bare. So, I created another for the laundry room. I wasn’t paying much attention and I created the lettering just a little tilted, so I just mounted it on the door a little tilted as well. Unless you know that it isn’t level, I don’t think you’d notice.

Laundry Room SignI’ve always been one of those people who seem to never be able to sit still and just watch television no matter how interesting the show or movie. I have to have something to do with my hands. So I hand sew, or paint or decorate or create jewelry. My latest diversion is creating food and accessories for the 18″ dolls. Once they have a kitchen, they have to have something to put in it, right?

So, I’ve started with food cans:

DSCN1557These are made from 1 1/4″ diameter dowels and the labels were printed from images I found online. I sized them correctly once, created a template for future labels in Photoshop. I used a real can and figured scale, something about 1:3 and 1:4. Mark the interval, also 1 1/4″ and cut them on my band saw. I lined them up and spray painted the tops and bottoms silver like cans. Then simply cut the labels out and adhere (I used a glue stick) onto the “cans”. I cannot wait to get the pantry in my doll house’s kitchen filled. I am also working on cereal boxes, pasta and mashed potato boxes and if I can find the right sized jars, I will do peanut butter, jelly and salsa as well. It allows me to be able to sit and still create.

And speaking of creating, I purchased a set of ‘knives’ on eBay for my kitchen. And the Kid did a wonderful job creating a small knife block for it. Didn’t it turn out wonderfully?

DSCN1559I included the chap stick so you get a sense of scale. And yes, the knives do come out of the block.

If you’ve been reading my blog, you know that cross stitch and rug hooking. And this time I did it to the dolls’ scale. First is cross stitch:

DSCN1517Once I had it all finished, I added the fringe on the two shorter sides to give it a more authentic look. I used plastic canvas so that it will last longer, I think it may be a bit more durable. The other is a hooked rug that I made using brown and white alternative yarns. It is very soft and will look nice under the corner of a bed or sofa.

Rug1And with that, I will wrap up tonight’s blog. It looks to be a beautiful day tomorrow, or so I hope. I think the Kid and are hoping to plant strawberries in the garden out in back of the house. A nice wet area that gets lots of moisture and sun.

Thanks for stopping by and come back soon! Oh, and as always, keeping making beautiful things just for the sake of it!


Doll House is Ready For Delivery

Last few details have been completed and the doll house is ready for delivery.

DSCN1498You may notice that there is a small gap between the “attic” and the rest of the cabinet. That’s simply because they are two parts, created that way for transport. Once it arrives at my grand niece’s home, I will put them together and they will fit tight. Really tight. I’ll post another few shots once it has been assembled.

Before PicsThese are the before shots… sorry about the quality of the pictures. But it does give you an idea of what I started with. I did a coat of primer and realized that it wasn’t going to be the optimum solution, so I opted to cover the box with something that resembled siding. I came up with the idea of using bead board, the kind that comes in 4′ x 8′ panels. All I needed to do is turn it sideways… and viola!, instant siding.

Siding House2Here are some shots of the process… and yes, the Kid was dutifully helping (adding trim to the doors). Looks great!

There were a lot of steps to the process and not sure exactly which ones happened first, so I’ll just post a bunch of the photos…

DSCN1434I added a drawer at the bottom, to hold odds and ends. Modified a drawer rescued from another dresser to fit, added small stoppers to keep the drawer from hitting the back and possibly knocking it off.

DSCN1456 DSCN1457 The remaining space was divided in half and added shelves; one above the drawer and one in the middle.

You can see how badly the primer was doing on this particular surface. Anytime you would touch it, the primer would scrape right off.

On the inside, I did do several more coats of primer and then a couple of coats of paint. I hope that it withstands the play it will get.

Next step was building the “attic”. It was taking shape as a ‘house, but needed just a little more to really do the trick. That’s when I came up with the idea of having an attic. Also allows for a little more play area.

DSCN1455 DSCN1454 DSCN1459 DSCN1458  I added the two vertical pieces on either side to keep it stable as it sat on top of the house. With just a tiny bit of sanding, it will go on with some strength, so there isn’t any danger in it falling off or being pulled off. Also why I opted to not photograph it with the attic in place.

I used actual shingles on the attic, cutting them down to appropriate size and nailed them on. Small wood pieces were painted white to be the trim.

DSCN1468For ease in working on this monstrosity, I added wheels. Made is so much easier to move around. All the layers were starting to add real weight to this thing.


DSCN1436I built the front door in layers. I decided that rather than put handles on the doors to open it, I would place a front door on it. Made it feel more like a dollhouse. And if things got messy, my niece could just close the doors until she had time to straighten things up.

DSCN1437I found this little door knocker at my local Habitat for Humanity ReStore. I used this knob I had and spray painted them both the same color silver.

I stumbled on all the colors, simply based on what was available. The outside was painted gray because I had nearly a full gallon of it. I like the way it turned out. The door, painted blue, because I had two full cans of blue spray paint. :-)

DSCN1505I created little windows for the house, spray painted white. I had thought about putting some sort of photo behind each one, but couldn’t come up with anything that I really like. My last ditch effort was to put a photo of mini-blinds, but didn’t like that idea either.


So they just went on with nothing. I did create little windows boxes for the front two windows, also painted blue. Added some miniature flowers in purple.




DSCN1498Okay, almost done. I added some vinyl tiles to one level and created a checkerboard pattern in red and white for the bottom level. I covered it with a large piece of plexi used to diffuse florescent lighting. I found a piece at Home Depot that had a crack at one end, but a piece large enough remained. The wonderful folks at Home Depot gave it to me free of charge. Gave the flooring an unique look.

Short of that, the doll house was complete. I added the stove, refrigerator and sink unit I blogged about earlier. Added a small storage unit and made a simple bed for the upper floor. And with that, the project was complete. I’ll let the photos do the talking:



And some photos of the interior:



Here are a few more close up photos of the inside:




DSCN1503And with that, this long project draws to a close. I think that we will deliver this in the next day or so. And then I can work on mine! Although mine will be done in a much longer time frame. No hurry to get it done, ya know!

I hope you enjoyed this and thank you for stopping to take a look. Will post more photos after it is delivered.

And keep making beautiful stuff, just for the sake of it!


Mismatched Hardware? Sometimes Its More Than Okay

I had mentioned in an earlier post that I am always on the lookout for unique and interesting hardware for furniture. Sometimes when I do find pieces I just cannot live without, there are not very many pieces. At least not enough to do a single piece.

That is what happened with today’s subject. I don’t so a lot of green, but love many of the shades that green comes in. And in the course of collecting, I ran across a few beautiful pieces that only came in a pair, or sometimes 4 of a kind. I was sorting and reviewing my hardware collection, when it occurred to me that I had enough green pieces for a dresser if I was okay with using mismatched pieces. I was! I was hoping to find a dresser or vanity that only required 4 pairs, but when I stumbled onto this – well, shall we say – very loved dresser, I knew it would be perfect for the mismatched hardware.

I started with the usual routine, repairing drawers and sanding. When I stripped the first couple of layers of paint and stain from the top, I knew there was some beautiful wood under all of that. So with much sanding and scraping, I uncovered some beautiful oak. I didn’t have the stamina or the sanding tools to remove it from the body, but I decided that if I used a very light shade of green to blend with the hardware, I thought it would turn out okay.

Well, after the primer coats and three coats of a shade of green that is called Mystic Light – almost looks white, even photographs that way. But with the natural stain on the top and the green handles really makes it work. And like I said, there are four matching sets of hardware and the top and bottom drawers have the same hardware. But since they are so far from each other, I don’t think that it hampers the total result.

I’ll stop talking (typing!) and just show you the results… you be the judge!

Light Green Before&After

I absolutely love the way this turned out. I am so hesitant to part with this beautiful jewelry on this piece of furniture. I’ll post it on Craigslist and see how well it is received. Maybe if it doesn’t seem to appeal to others, then maybe I will move this upstairs into the guest room and sell the piece I just finished and put there! Yes, I love this piece that much!

Here are some closeups of that beautiful hardware:

DSCN1416 DSCN1415

And another angle of the total package:


Isn’t the wood on top gorgeous? I love the older furniture – the construction techniques, the angles and curves and the materials used. And that they’re definitely worth refinishing and working on. And the piece will be around for a long time after that too.

I completely missed celebrating my 100th post and now this makes 103! And do I need to say that I love comments, so if there is anything that you’ve seen or read that you enjoy, please leave me a comment. Saying hi is enough!

Thanks for dropping by! And come back again soon!

And as always, keep making beautiful things just because…


Wow, Work Really Cuts Into Crafting Time!

Been at the new job for two weeks now and even though the time seems to fly by, I never seem to have enough hours in the day to do those things I want to do. And here it is Sunday evening and winding down the end of a hectic weekend and getting ready to watch the season premier of MadMen, I wanted to post a couple of pictures of what I have been able to do.

Although I have been working slowly on acquiring and plan for the doll houses I hope to make, I have not put any of the info up here yet. I may have mentioned it before, but my grandnieces have fallen head over heels for the American Girl dolls, although their grandparents (my brother and his wife) as well as myself, have not been in love with the prices for either the dolls or their “stuff”. Even if you buy ‘compatible’ accessories, it is still a lot of money to spend on toys! So, I have set about figuring out how to create my own version of a dollhouse without breaking the bank. And of course, along the way, doing a lot of crafting and otherwise unusual uses to everyday objects.

I will share one quick find… one of the doll houses will have a kitchen (maybe both). But I found a steamer tray that will serve the purpose of the sink perfectly! By virtue of the sink being stainless steel, the kitchen(s) will have all stainless steel appliances. :-)


The little steamer tray measures a perfect 5″ x 6″, which works perfectly for the kitchen sink. And with a depth of about 3″, it looks like the real deal. I am slowly putting the pieces together for the kitchen cabinets which include a drawer unit (need someplace for the silverware) as well as upper cabinets. I am psyched! It is coming together slowly, but that’s okay, it is meant to be a project for me and in the end, and awesome presents for my favorite grandnieces. I have been taking a pictures (a miracle, I know!) and am slowly keep track of the work I am doing, although with everything that there is to be done, not sure I want to wait until I am all done to write the post. I will have to see just how much time I have…

Sold almost all of the projects I had done, only one small dresser left that I had completed. The young lady who bought the pink dots dresser also asked for two more, so I have been diligently preparing those dressers as per her request. I have several beautiful pieces that I have been restoring (beauty being in the eye of the beholder!) and did get one other finished. This was one of those freebies that I had been contacted via Craigslist that it was sitting on the side of a curb with snow about to fall. Me and the Kid took off in the truck to pick it up. Worst case scenario, we get it home and it isn’t solid wood, I donate it to one of my two favorite thrifts. Sometimes I get awesome hardware or drawer glides from them. Sometimes they are candidates for some kind of reinvention. Sometimes I find gold! In this case, it was a definite find… under this horrendous neon green paint was a diamond in the rough.


But first glance tells you that this is an old piece, made long before they decided to use MDF in manufacturing and call it wood furniture. This used to have locks and keys and has that sweet curve to the drawer fronts. I am a sucker for those gentle curves.

So, the usual sanding to bring things down to a manageable starting place, followed by a couple of coats of primer. The most unusual thing occurred during the primer stage, the paint bled through the primer red! Wondering if anyone else had ever experienced this before or understood why. Enough coats of primer and this solved the problem. This was followed by several coats of a very light blue paint on the body and drawers, a darker shade of the same blue, which matched the same shade of blue as the glass handles. I love the way it all ties together.


A shot from the top:DSCN1370

A quick pic from the other side:DSCN1371

A close-up of the glass handles:


And here is a quick before and after shot:

Blue Glass Handles Before&After

I love the way this one turned out. But then again, I like ninety-nine percent of the dressers that I complete! I will be slowing down on the number of dressers, as they have been primarily a source of income as well as a creative outlet. Now that I have started back to work, I will probably switch to doing a wider variety of projects including the doll house and accessories.

This is my 99th blog entry! I am so excited about what to do for the next one to celebrate. I have a couple of dressers in process, but that seems so mundane. I must have something really amazing. But I don’t want to hold off too long. I’ll give it some thought!

Thank you for stopping by! I love all my readers and hope that I am providing some useful information here.

Keep up the crafting and be sure to share!




Get every new post delivered to your Inbox.

Join 1,263 other followers

%d bloggers like this: